Tover Home Maxi Lacquer

Tover Home Maxi Floor Lacquer

"Easy to use water-based floor lacquer, with excellent durability for domestic and light commercial use."

Lacquer Features and Highlights:

• Single-component, water-based floor lacquer
• Perfect for domestic or light-commercial use
• Very low contents of VOC - Isocyanate, NEP and NMP free
• GreenGuard approved for low indoor emissions
• Easy application without causing overlaps

Tover Home Maxi is a water-based, polyurethane floor lacquer. Ideal for floors in offices, small shops, hotel rooms and domestic properties, Home Maxi offers the performance of a 2K floor varnish in a ready-to-use formula. Provides excellent flow and levelling to give an exceptional, professional looking finish every time.

• Want to retain the natural 'untreated' look of wooden floors? Consider Bona Mega Natural.
• Need a 2-pack floor varnish for heavy use commercial environments? Use Bona Traffic HD Lacquer.

Preparation

Previously waxed, polished or oiled floors cannot be overcoated with Home Maxi unless sanded back to bare wood. Prior to application the timber surface should be prepared to a smooth finish, cleaned and dry. Recoating previously sealed floors with Home Maxi lacquer, should be done after screen buffing and cleaning the surface of dirt and any contamination.

• Complete sanding back to bare wood with finishing in fine grits between 80 - 120
• Screen buff the timber surface for maximum smoothness with 80 - 150 grits
• Vacuum clean traces of dust from the area to be sealed
• For filling small gaps between floor boards and skirting boards, use Bona Gap Master Filler, 310 mm.
• Recommended application of Tover Base Primer, Bona Primer Classic or an alternative wood primer, as per project requirements

Wood Floor Primers

For application to bare wood floors we recommend using a wood primer. Primers help with adhesion between the varnish and floor and can help with the colouration of the final finish. Home Maxi is compatible with the following primers:

• Bona Classic Primer, 5L
• Bona White Primer

Application

Prior to application of Tover Home Maxi shake well container and always test on a dry surface for a product suitability. Read manufacturer recommendation, product expiry date on labelling and check environment temperature is below 13°C or above 25°C during application and drying. 

The following applicators are recommended for application of Home Maxi:

• Use brush, roller or floor applicator to apply a thin coat of the product. 
• Apply 2 coats over a primer, depending on the project requirements. Athough the Home Maxi does not require primer by specification, the use of such is always recommended.
• Start from the edge of the area with a smooth flowing action across and with the grain of the wood.
• Make sure appliaction is even without excessive overlaping.
• Allow 1 to 2 hours drying time per coat and anticipate drying time will increase with every coat applied.
• Apply 2 coats or more coats if required, with minimum of 3 coats including primer for wooden floors.
• Lightly sand or denib using a sanding screen, grit 150 or finer before application of  the final coat.

Please Note: Do not cover recently sealed floors with plastic protection like correx or similar products, as this can cause damage to uncured finish.

Lacquer Features

It has all the advantages of a waterbased system, but still gives a deep, rich colouration similar to a solvent based finish. Tover Home Maxi is available in ExtraMatt, Matt and SilkMatt sheens.

• Water-based
• VOC 2010 compliant
• Easy to use, only one component
• Oxygen crosslinked
• Deep, rich solvent based appearance
• High resistance to wear, scuff marks, chemicals and scratches
• Available in ExtraMatt, Matt and SilkMatt sheens

• Tover Home Maxi Technical Details