Tover Lega Wood Floor Joint Filler, 10L

Tover Lega Wood Floor Joint Filler (Lega Stucco RS-A) is a solvent-based resin filler specially formulated and developed for sealing joints, gaps, splits, small cracks up to 5 mm and holes (up to 10 mm) in solid / well fixed wooden floors or wooden panelling.

Tover Lega Joint Filler is recommended for general filling of wooden strip flooring or parquet blocks flooring and should be avoided for use on suspended flooring, or flooring with minor movement which can cause the f. Do not use on wooden floors laid on floor battens. The resin filler dries and hardens quickly. Outstanding adhesion to most wood species.

Joint Filler Facts:

• Product name variation - Tover Lega Stucco RS-A
• Mix with the sawdust prior to fill scratches, cracks and dents in wooden floor, furniture and panelling
• Excellent flexibility during use
• Ultra fast drying time: ready to sand in 15 to 30 minutes
• Outstanding adhesion - to be used only on bare and sanded wood
• Apply using a wide spatula
• Natural finish
• The filler will have weaker binding properties for timber floors with higher moisture content, e.g. > 11%.

Application:

• Check timber moisture content prior to floor works (always recommended).
• Sand the floors with coarse grid followed by medium to fine grids to strip old finish and level the floors.
• Collect dust from medium or finer grids into a pile and our some of the resin filler
• Apply the putty created with Tover Lega joint resin filler throughout the floors using a large (10-12") spatula
• Leave the filler to settle and harden for a minimum of 30 mins - best leave overnight
• Remove the excess of joint filler by sanding the floors and repeat application of the joint resin filler again if necessary

• Tover Lega Joint Filler Technical Details